Xfce Forum

Sub domains
 

You are not logged in.

#1 2007-04-22 21:20:47

je-saist
Member
Registered: 2007-04-22
Posts: 1

Able to install : however Xfce 4.4.1 will not start

Okay, I wrote this : http://www.mepisguides.com/Mepis-6/desk … fce-1.html

Which works on Xfce 4.4.0.  However, when attempting to install Xfce 4.4.1 on top of the older version using the same steps, Xfce would no longer start. Figured it was a conflict. Re-installed OS, checked dependencies again in the Graphical Installer to make sure that none were missing. Installed Xfce 4.4.1 again, and again, when attempting to start Xfce 4.4.1, it fails.

Went back and put Xfce 4.4.0 on an Intel Pentium4 530 system, mobile 6800 GPU, Nvidia-GLX enabled. 

Entered Run Level 3, started script and this is the output, including the manual log-out from inside of Xfce.

Script started on Sun 22 Apr 2007 05:02:44 PM EDT
root@0[bin]# sh startxfce4
startxfce4: Starting X server

X: warning; process set to priority -11 instead of requested priority -10

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15-27-desktop-smp i686
Current Operating System: Linux Li-Mobile-Threat 2.6.15-27-desktop #1 PREEMPT Sun Mar 11 21:36:14 EDT 2007 i686
Build Date: 07 July 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 22 17:02:49 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "wfb" (module does not exist, 0)
    xkb_keycodes             { include "xfree86+aliases(qwerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc104)+us" };
    xkb_geometry             { include "pc(pc104)" };
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Invalid argument
Synaptics DeviceInit called
SynapticsCtrl called.
Synaptics DeviceOn called
Could not init font path element /usr/share/fonts/X11/misc/, removing from list!
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/Type1/, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
Could not init font path element /usr/share/fonts/X11/100dpi/, removing from list!
Could not init font path element /usr/share/fonts/X11/75dpi/, removing from list!
Agent pid 3944
sh: fortune: command not found
** Message: xfsm-shutdown-helper.c:209: Using HAL to shutdown/reboot the computer.
Agent pid 3944 killed
Synaptics DeviceOff called
The application 'xfce-mcs-manager' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.


waiting for X server to shut down FreeFontPath: FPE "/usr/share/X11/fonts/misc" refcount is 2, should be 1; fixing.



root@0[bin]# exit

Script done on Sun 22 Apr 2007 05:03:29 PM EDT


Next, installed Xfce 4.4.1 on an AthlonXp with a Geforce 6600 GT, Nvidia-Glx enabled.  this is the typescript output.

Script started on Sun 22 Apr 2007 04:39:35 PM EDT
root@0[bin]# exitstartxopx[5@terminatexexittsh startxfce4tartxfce4[3@h startxfce4
startxfce4: Starting X server

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15-27-desktop-smp i686
Current Operating System: Linux Li-Virus 2.6.15-27-desktop #1 PREEMPT Sun Mar 11 21:36:14 EDT 2007 i686
Build Date: 07 July 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 22 16:39:42 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "wfb" (module does not exist, 0)

    xkb_keycodes             { include "xfree86+aliases(qwerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc104)+us" };
    xkb_geometry             { include "pc(pc104)" };
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
Could not init font path element /usr/share/fonts/X11/misc/, removing from list!
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/Type1/, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
Could not init font path element /usr/share/fonts/X11/100dpi/, removing from list!
Could not init font path element /usr/share/fonts/X11/75dpi/, removing from list!
Agent pid 4764
/usr/local/xfce/etc/xdg/xfce4/xinitrc: line 109: xfce-mcs-manager: command not found
/usr/local/xfce/etc/xdg/xfce4/xinitrc: line 110: xfwm4: command not found
/usr/local/xfce/etc/xdg/xfce4/xinitrc: line 143: xfdesktop: command not found
/usr/local/xfce/etc/xdg/xfce4/xinitrc: line 144: orage: command not found
Agent pid 4764 killed


waiting for X server to shut down FreeFontPath: FPE "/usr/share/X11/fonts/misc" refcount is 2, should be 1; fixing.



root@0[bin]# exit

Script done on Sun 22 Apr 2007 04:40:01 PM EDT


One more system, put Xfce 4.4.1 on an Intel Pentium4 630, Radeon x1800 XT, Fgrlx Enabled.

Script started on Sun 22 Apr 2007 05:04:31 PM EDT
root@0[bin]# sh xfce    stat rtxfce4
startxfce4: Starting X server

X: warning; process set to priority -11 instead of requested priority -10

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15-27-desktop-smp i686
Current Operating System: Linux Li-Quid 2.6.15-27-desktop #1 PREEMPT Sun Mar 11 21:36:14 EDT 2007 i686
Build Date: 07 July 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 22 17:04:41 2007
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
    xkb_keycodes             { include "xfree86+aliases(qwerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+us" };
    xkb_geometry             { include "pc(pc105)" };
Could not init font path element /usr/share/fonts/X11/misc/, removing from list!
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/Type1/, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
Could not init font path element /usr/share/fonts/X11/100dpi/, removing from list!
Could not init font path element /usr/share/fonts/X11/75dpi/, removing from list!
Agent pid 3817
/usr/local/xfce/etc/xdg/xfce4/xinitrc: line 109: xfce-mcs-manager: command not found
/usr/local/xfce/etc/xdg/xfce4/xinitrc: line 110: xfwm4: command not found
/usr/local/xfce/etc/xdg/xfce4/xinitrc: line 143: xfdesktop: command not found
/usr/local/xfce/etc/xdg/xfce4/xinitrc: line 144: orage: command not found
Agent pid 3817 killed


waiting for X server to shut down .FreeFontPath: FPE "/usr/share/X11/fonts/misc:unscaled" refcount is 2, should be 1; fixing.



root@0[bin]# exit

Script done on Sun 22 Apr 2007 05:04:58 PM EDT


As best as I can figure

A: the installer is failing and not informing of the failure
B: There is a missing development dependancy.

I've also tried the Xfce 4.4.1 installer on a couple of different computers ( systems listed here : http://zerias.blogspot.com/2007/04/auct … mepis.html ) and had to go back to Xfce 4.4.0 because 4.4.1 would not start.


Any ideas on what is broken?

Offline

#2 2007-04-23 09:11:46

Nick
Dev
From: ~
Registered: 2005-02-17
Posts: 1,144
Website

Re: Able to install : however Xfce 4.4.1 will not start

Well the commands are not found, so make sure the prefix you've used for the installation is in the PATH.

PS. Showing the Xfce dependencies in KWrite :cry:

Offline

Registered users online in this topic: 0, guests: 1
[Bot] ClaudeBot

Board footer

Powered by FluxBB
Modified by Visman

[ Generated in 0.012 seconds, 7 queries executed - Memory usage: 568.8 KiB (Peak: 594.99 KiB) ]